Forklift Repair Federal Way
A forklift is one of the important pieces of equipment you need in your warehouse. If you have long work hours, you will need a well-functioning forklift for maximum output
A bad or faulty forklift will decrease the day’s productivity and can cause you to run at a loss and suffer a dent in your delivery reputation. This is why it is essential to have a proper maintenance plan for your forklift and also have a forklift repair company in case of such emergencies To reduce the production cost, many warehouses in Federal Way buy used Forklifts online instead of new ones. If your forklift was also a fairly used one, to prevent it from regular breakdowns, you will need good maintenance and regular checking to prevent the forklift’s sudden breakdown. |
|
Federal Way Forklift Repair
Types of Forklifts and Their Uses
Counterbalance Forklifts
These types of forklifts are the most commonly used forklifts. They are used for handling materials. It has dual forks which you can use to move and carry heavy loads. They are commonly used indoors even though they can also function well on even grounds outdoors.
Three-wheel Counterbalance ForkliftsAs the name implies, it is a counterbalance forklift with three wheels instead of four. They perform the same function as counterbalance forklifts. However, they are built for smaller spaces. So, if you have narrow warehouse aisles, you should go for the three-wheel counterbalance forklifts.
Sideloaders |
These are trucks with forks attached to their sides. They are also good for narrow warehouse aisles. And you can use them to lift long or wide loads that will be hard to be lifted by other types of forklifts. There are two types of side loaders; the suitable indoor stand-up version, and the enclosed one suited for outdoor works.
Reach truck Forklifts
Reach truck forklifts are used to reach high-altitude loads. The forks will slide under the load and lift them. There are two types; the Stand-up trucks and the double deep truck. The stand-up truck is used when you need to pick up a load in view. In comparison, the double deep truck can go deeper and pick loads from the back.
Rough Terrain forklifts
When you are off the road in Federal Way, all left is sand, mud, gravel, and dirt. Rough terrain forklifts are suitable for these uneven grounds. They have inflammable tires, which allow the truck to move without stress and the danger of bursting tires.
Also, they are good for moving heavy loads along uneven grounds, snow, and mud.
Also, they are good for moving heavy loads along uneven grounds, snow, and mud.
Forklift Safety Tips
If you want to ensure that your forklift lasts long, there are some safety tips apart from the maintenance plan.
Dos
Don't(s)
Dos
- Check for the floor loading limit.
- Use the controls smoothly. If the gears seem stiff, oil them.
- Ensure the forklift has stopped before you raise a load.
- Check the weight and size of the load before lifting it. To ensure it does not exceed the forklift’s capacity.
- When going on slopes, move gently.
- Park the forklift on an even ground.
- Avoid braking violently.
- Lower loads at an even speed.
- Ensure the load is stable before you lift the load
- Report or repair defects as soon as you notice them.
Don't(s)
- Do not carry a load whose weight exceeds the forklift’s capacity.
- Do not lift loads attached to something.
- Do not leave the vehicle while the forklift is loaded or the load is raised.
- Do not carry too many loads that will obstruct your driving view. If you have to, drive in reverse.
- Do not leave the forklift truck on a sloppy road.
- Do not leave a forklift on and unattended to Maintain Forklift
- Check the machine after the day’s work: There are some essential parts to check every day or every other day after using the machine. Inspect it for faulty brakes, leaking fluids, punctured tires, and the like. If you check for faults regularly, you will be able to prevent breakdown and minor issues.
- Follow the manufacturer’s manual on maintenance: The forklift machine usually has a manual on how to maintain its parts and the machine as a whole. Follow it thoroughly.
- Do the basic maintenance: Basic maintenance includes oil changes, fluid changes, checking tires condition, servicing the brakes, oiling the gears and joints, replacing the spark plugs, and many more. You can also find it in your manual.
- Clean the forklift’s parts regularly: Cleaning the forklift’s parts ensures the parts function well and to their full capacity. For example, the radiator of the forklift machine can easily accumulate dust, which prevents optimal function, and this can cause the machine to overheat.
Mobile Forklift Repair Federal Way
Tacoma Heavy Equipment Repair helps to service and repair faulty forklifts and heavy equipment. Also, if you need a diesel mechanic in Federal way, our certified professionals are available to work. If you are running a warehouse in Federal way, a forklift is a part of your daily activity. Call on us to help you service your forklift we are the top company for forklift repair Federal Way.
What mileage is too high for a forklift?
A forklift can last 200,00 to 300,00 miles. The mileage of a forklift machine is mostly determined by the working hours. And 20 automobile miles is approximately equal to one forklift’s operating hour. This will mean 10,00 to 15,00 operating hours.
How much does it cost to replace a forklifts’ battery?
Replacing a forklift's battery will cost between $2,000 and $6,000 depending on the battery’s specifications.